apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device

[Ivan Dolnák]

2011/3/26 Ivan Dolnák <ivan.dolnak na gmail.com>:
> 2011/3/26 Dan Lukes <dan na obluda.cz>:
>> Ivan Dolnák wrote:
>>> Predpokladam, ze ide o bezny kabel pre konverziu SERIAL->USB s cipom
>>> Prolific.
>>
>> Zda se to byt pravdepodobne. Pak ale vidime, ze ...
>>
>>> ugen4.2: <USB-Serial Controller D Prolific Technology Inc.> at usbus4,
>>> cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
>>
>> ... v systemu neni pritomen ovladac tohoto hardware (z hlavy -
>> uplcom.ko), ktery by zpusobil, ze dotcene zarizeni bude v systemu
>> pritomno jako ten "seriak". Zatim se zda, ze je tam jako genericke
>> zarizeni (tedy zarizeni bez specifickych ovladacu) a s tim software pro
>> APC pracovat neumi.
>>

Este toto:
# dmesg -a | grep uplcom
uplcom0: <Prolific Technology Inc. USB-Serial Controller D, class 0/0,
rev 1.10/4.00, addr 2> on usbus4


>
> Nie je mi jasne, v com je chyba. uplcom je v GENERIC povolene. ani
> kldload ho neumozni nahrat ako modul. Podla mna je tam, kde ma byt.
> Konfiguracia apcupsd.conf je spravne?
>
>
> # cat /usr/src/sys/amd64/conf/GENERIC | grep uplcom
> device          uplcom          # Prolific PL-2303 serial adapters
> #
>
> # kldstat
> Id Refs Address            Size     Name
>  1    6 0xffffffff80100000 c9fe20   kernel
>  2    1 0xffffffff80da0000 2720     aibs.ko
>  3    1 0xffffffff80e22000 a26      fire_saver.ko
> #
>
>
> # kldload /boot/kernel/uplcom.ko
> kldload: can't load /boot/kernel/uplcom.ko: Exec format error
>
> #dmesg -a
> interface uplcom.1 already present in the KLD 'kernel'!
> linker_load_file: Unsupported file type
> #
>
>
>
>> Dan
>>
>> --
>> FreeBSD mailing list (users-l na freebsd.cz)
>> http://www.freebsd.cz/listserv/listinfo/users-l
>>
>