SpeedTouch USB ADSL
ondra.holecek.bln at centrum.cz
ondra.holecek.bln at centrum.cz
Wed Jun 2 12:31:12 CEST 2004
Dobry den,
koupil jsem si od Teskeho Telecomu adsl pripojeni, prisel mi i SpeedTouch USB modem, jenomze uz nevim co mam delat abych ho na freebsdckach zprovozil, kdyz dam ppp -background adsl (nebo podobny) ppp vzdycky skonci s chybou Child Death
pokud pustim modem_run:
/usr/local/sbin/modem_run -f /usr/local/libdata/mgmt.o
tak to nic nedela, ze to musim treba po deseti minutach zrustit ctrl+c
problem mozna bude tady:
root at custodian# pppoa2 -vpi 8 -vci 48 -v 1
pusb_endpoint_open: couldn't open endpoint /dev/ugen0.7: No such file or directory
tak sem tam udelal symlink na /dev/ugen0.5, ale nevim jestli to nevadi.
btw. to cislo -vpi 8 a -vci 48 jsem nasel na internetu ze plati pro Cesky Telecom ale nevim jestli to tak opravdu je, muzete se nekdo podivat jaky cisla se doopravdy pouzivaji?
dal uz proste nevim co stim abych ho mohl pouzivat, muzete mi poradit nekdo kdo uz ste to pripojovali?
dik Ondra
<FreeBSD 5.2>
muj konfigurak v /etc/ppp/ppp.conf vypada takhle:
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself at cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $
#################################################################
default:
#set log Phase Chat LCP IPCP CCP tun command
set log Phase Chat IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa0
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK ATM0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 600 # 3 minute idle timer (the default)
adsl:
set phone 0
set authname jmeno
set authkey heslo
set device !"/usr/local/sbin/pppoa2 -vpi 8 -vci 48 -v 2"
accept chap
set speed sync
set timeout 0
enable lqr
set lqrperiod 5
set redial 15 10000
set dial ""
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
nat enable yes
enable dns
a /var/log/ppp.log vypise tohle:
Jun 2 11:35:14 custodian ppp[1283]: tun0: Phase: PPP Started (interactive mode).
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: /dev/ttyp0: dial adsl
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set phone 0
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set authname 417884707
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set authkey ********
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set device !/usr/local/sbin/pppoa2 -vpi 8 -vci 48 -v 2
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: accept chap
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set speed sync
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set timeout 0
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: enable lqr
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set lqrperiod 5
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set redial 15 10000
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set dial
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: add default HISADDR
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: nat enable yes
Jun 2 11:35:16 custodian ppp[1283]: tun0: Command: adsl: enable dns
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: bundle: Establish
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: closed -> opening
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: Connected!
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: opening -> dial
Jun 2 11:35:16 custodian ppp[1283]: tun0: Chat: deflink: Dial attempt 1 of 10000
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: dial -> carrier
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: carrier -> login
Jun 2 11:35:16 custodian ppp[1283]: tun0: Phase: deflink: login -> lcp
Jun 2 11:35:16 custodian ppp[1283]: tun0: LCP: FSM: Using "deflink" as a transport
Jun 2 11:35:16 custodian ppp[1283]: tun0: LCP: deflink: State change Initial --> Closed
Jun 2 11:35:16 custodian ppp[1283]: tun0: LCP: deflink: State change Closed --> Stopped
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: deflink: LayerStart
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: MRU[4] 1500
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: MAGICNUM[6] 0x01154dcf
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Jun 2 11:35:17 custodian ppp[1283]: tun0: LCP: deflink: State change Stopped --> Req-Sent
Jun 2 11:35:20 custodian ppp[1283]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
Jun 2 11:35:20 custodian ppp[1283]: tun0: LCP: MRU[4] 1500
Jun 2 11:35:20 custodian ppp[1283]: tun0: LCP: MAGICNUM[6] 0x01154dcf
Jun 2 11:35:20 custodian ppp[1283]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Jun 2 11:35:23 custodian ppp[1283]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
Jun 2 11:35:23 custodian ppp[1283]: tun0: LCP: MRU[4] 1500
Jun 2 11:35:23 custodian ppp[1283]: tun0: LCP: MAGICNUM[6] 0x01154dcf
Jun 2 11:35:23 custodian ppp[1283]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Jun 2 11:35:26 custodian ppp[1283]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
Jun 2 11:35:26 custodian ppp[1283]: tun0: LCP: MRU[4] 1500
Jun 2 11:35:26 custodian ppp[1283]: tun0: LCP: MAGICNUM[6] 0x01154dcf
Jun 2 11:35:26 custodian ppp[1283]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Jun 2 11:35:29 custodian ppp[1283]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
Jun 2 11:35:29 custodian ppp[1283]: tun0: LCP: MRU[4] 1500
Jun 2 11:35:29 custodian ppp[1283]: tun0: LCP: MAGICNUM[6] 0x01154dcf
Jun 2 11:35:29 custodian ppp[1283]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Jun 2 11:35:33 custodian ppp[1283]: tun0: LCP: deflink: LayerFinish
Jun 2 11:35:33 custodian ppp[1283]: tun0: LCP: deflink: State change Req-Sent --> Stopped
Jun 2 11:35:33 custodian ppp[1283]: tun0: LCP: deflink: State change Stopped --> Closed
Jun 2 11:35:33 custodian ppp[1283]: tun0: LCP: deflink: State change Closed --> Initial
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: Disconnected!
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: lcp -> logout
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: logout -> hangup
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: Disconnected!
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: Connect time: 17 secs: 0 octets in, 130 octets out
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: 0 packets in, 5 packets out
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: total 7 bytes/sec, peak 10 bytes/sec on Wed Jun 2 11:35:20 2004
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: HUPing 1285
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: deflink: hangup -> closed
Jun 2 11:35:33 custodian ppp[1283]: tun0: Phase: bundle: Dead
jeste co mam v /var/log/pppoa2.log
Jun 2 12:03:52 custodian pppoa2[1432]: Using vpi=8, vci=48
Jun 2 12:03:52 custodian pppoa2[1432]: I'm the parent process, I handle the endpoint 0x07
Jun 2 12:03:52 custodian pppoa2[1432]: pty descriptors : fdin=3, fdout=4
Jun 2 12:03:52 custodian pppoa2[1432]: Increasing SNDBUF from 2048 to 65536
Jun 2 12:03:52 custodian pppoa2[1432]: Increasing RCVBUF from 4096 to 65536
Jun 2 12:03:52 custodian pppoa2[1432]: Where is this crappy modem ?!
More information about the Users-l
mailing list