hostname# smartctl -x /dev/ad0 smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.3-RELEASE amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Intel 320 Series SSDs Device Model: INTEL SSDSA2CW160G3 Serial Number: CVPR114205F6160DGN LU WWN Device Id: 5 001517 95952f151 Firmware Version: 4PC10362 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Wed May 9 14:42:35 2012 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x75) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time -----K 100 100 000 - 0 4 Start_Stop_Count ----CK 100 100 000 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 9 12 Power_Cycle_Count -O--CK 100 100 000 - 57 170 Reserve_Block_Count PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 183 Runtime_Bad_Block ----CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 090 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 51 199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 225 Host_Writes_32MiB -O--CK 100 100 000 - 590109 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 38467221 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 228 Workload_Minutes -O--CK 100 100 000 - 2811559061 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 590109 242 Host_Reads_32MiB -O--CK 100 100 000 - 43372 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not supported Read GP Log Directory failed. SMART Log Directory Version 1 [multi-sector log support] SMART Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 8 sectors [Comprehensive SMART error log] SMART Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x04 has 8 sectors [Device Statistics log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] SMART Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] SMART Log at address 0x10 has 1 sectors [NCQ Command Error log] SMART Log at address 0x11 has 1 sectors [SATA Phy Event Counters] SMART Log at address 0x80 has 16 sectors [Host vendor specific log] SMART Log at address 0x81 has 16 sectors [Host vendor specific log] SMART Log at address 0x82 has 16 sectors [Host vendor specific log] SMART Log at address 0x83 has 16 sectors [Host vendor specific log] SMART Log at address 0x84 has 16 sectors [Host vendor specific log] SMART Log at address 0x85 has 16 sectors [Host vendor specific log] SMART Log at address 0x86 has 16 sectors [Host vendor specific log] SMART Log at address 0x87 has 16 sectors [Host vendor specific log] SMART Log at address 0x88 has 16 sectors [Host vendor specific log] SMART Log at address 0x89 has 16 sectors [Host vendor specific log] SMART Log at address 0x8a has 16 sectors [Host vendor specific log] SMART Log at address 0x8b has 16 sectors [Host vendor specific log] SMART Log at address 0x8c has 16 sectors [Host vendor specific log] SMART Log at address 0x8d has 16 sectors [Host vendor specific log] SMART Log at address 0x8e has 16 sectors [Host vendor specific log] SMART Log at address 0x8f has 16 sectors [Host vendor specific log] SMART Log at address 0x90 has 16 sectors [Host vendor specific log] SMART Log at address 0x91 has 16 sectors [Host vendor specific log] SMART Log at address 0x92 has 16 sectors [Host vendor specific log] SMART Log at address 0x93 has 16 sectors [Host vendor specific log] SMART Log at address 0x94 has 16 sectors [Host vendor specific log] SMART Log at address 0x95 has 16 sectors [Host vendor specific log] SMART Log at address 0x96 has 16 sectors [Host vendor specific log] SMART Log at address 0x97 has 16 sectors [Host vendor specific log] SMART Log at address 0x98 has 16 sectors [Host vendor specific log] SMART Log at address 0x99 has 16 sectors [Host vendor specific log] SMART Log at address 0x9a has 16 sectors [Host vendor specific log] SMART Log at address 0x9b has 16 sectors [Host vendor specific log] SMART Log at address 0x9c has 16 sectors [Host vendor specific log] SMART Log at address 0x9d has 16 sectors [Host vendor specific log] SMART Log at address 0x9e has 16 sectors [Host vendor specific log] SMART Log at address 0x9f has 16 sectors [Host vendor specific log] SMART Log at address 0xe0 has 1 sectors [SCT Command/Status] SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Error Read SCT Data Table failed: request failed, error code 0x05 SCT Error Recovery Control: Read: Disabled Write: Disabled SATA Phy Event Counters (GP Log 0x11) not supported