Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #0: Wed Sep 21 10:55:56 CEST 2005
    root@test.machine:/usr/obj/usr/src/sys/IBM33x
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family      1400MHz (1396.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073659904 (1023 MB)
avail memory = 1039347712 (991 MB)
MPTable: <IBM ENSW NF 4100R SMP>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  3
 cpu1 (AP): APIC ID:  0
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 1.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2200-0x223f mem 0xfeb7f000-0xfeb7ffff,0xfea00000-0xfeafffff irq 27 at device 2.0 on pci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x48a0
fxp0: EEPROM checksum @ 0x3f: 0x356 -> 0x356
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:09:6b:58:73:7a
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2240-0x227f mem 0xfeb7e000-0xfeb7efff,0xfe900000-0xfe9fffff irq 25 at device 10.0 on pci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x48a0
fxp1: EEPROM checksum @ 0x3f: 0x7259 -> 0x7259
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:09:6b:58:73:7b
isab0: <PCI-ISA bridge> port 0x440-0x44f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x2300-0x23ff mem 0xeffff000-0xefffffff irq 28 at device 3.0 on pci1
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff,0xcc800-0xd0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc1: parallel port not found.
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <LG CD-ROM CRN-8245B/1.13> at ata0-master UDMA33
pass2 at ahc0 bus 0 target 8 lun 0
pass2: <IBM FTlV1 S2 0> Fixed Processor SCSI-2 device 
pass2: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-ESXS ST336605LC    !# B245> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM-ESXS ST373405LC    !# B243> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a