PCI to PCMCIA adapter (solved)

[Marian Cerny]

On 2007-08-18 18:27 +0200, Marian Cerny wrote:
> pouziva niekto PCI to PCMCIA adapter pod FreeBSD? Ja sa snazim rozbehat
> na FreeBSD 6.2R jeden s Ricoh chipsetom, ale nefunguje spravne.
> Nerozpozna ziadnu kartu. Pritom niekedy davno fungoval, ale neviem
> presne na akej verzii FreeBSD (mozno este 4.x, alebo nejaky starsi 5.x).
> Viete odporucit nejaky funkcny (idealne link na e-shop)?

Tak som zakupil adapter DeLock s chipom R5C485 a tento uz funguje ok.
http://delock.mironet.cz/delock-pci--pcmci-redukce+dp66220/

> Adapter je:
> 	cbb0 at pci5:2:0:  class=0x060700 card=0x010114ef chip=0x04751180 rev=0x80 hdr=0x02
> 	    vendor   = 'Ricoh Co Ltd'
> 	    device   = 'RL5c475 CardBus Controller'
> 	    class    = bridge
> 	    subclass = PCI-CardBus

Novy sa hlasi dost podobne:

cbb0 at pci1:0:0:  class=0x060700 card=0x00000000 chip=0x04751180 rev=0x81 hdr=0x02
    vendor     = 'Ricoh Co Ltd'
    device     = 'RL5c475 CardBus Controller'
    class      = bridge
    subclass   = PCI-CardBus

> Ale po vlozeni PCMCIA karty to hlasi:
> 
> 	cbb0: card inserted: event=0x00000000, state=30000410
> 	pccard0: chip_socket_enable
> 	cbb_pcic_socket_enable:
> 	cbb0: cbb_power: 5V
> 	pccard0: read_cis
> 	pcib5: pccard0 requested memory range 0xfe300000-0xfeafffff: good
> 	cis mem map 0xe6e2c000 (resource: 0xfe310000)
> 	pccard0: CIS tuple chain:
> 	CISTPL_END
> 	 ff
> 	cis mem map e6e2c000
> 	CISTPL_LINKTARGET expected, code ff observed
> 	pccard0: check_cis_quirks
> 	pccard0: Card has no functions!

Novy hlasi:

	cbb0: card inserted: event=0x00000000, state=30000410
	pccard0: chip_socket_enable
	cbb_pcic_socket_enable:
	cbb0: cbb_power: 5V
	pccard0: read_cis
	pcib4: pccard0 requested memory range 0xcdd00000-0xcddfffff: good
	cis mem map 0xd7285000 (resource: 0xcdd10000)
	pccard0: CIS tuple chain:
	CISTPL_DEVICE type=null speed=null
	 01 03 00 00 ff
	CISTPL_VERS_1
	 15 28 05 00 4e 6f 6b 69 61 20 4d 6f 62 69 6c 65
	 20 50 68 6f 6e 65 73 00 4e 6f 6b 69 61 20 43 61
	 72 64 20 50 68 6f 6e 65 00 ff
	CISTPL_MANFID
	 20 04 24 01 00 09
	CISTPL_FUNCID
	 21 02 02 01
	CISTPL_FUNCE
	 22 04 00 02 0f 1c
	CISTPL_FUNCE
	 22 09 01 1f 3f 00 10 00 00 10 00
	CISTPL_FUNCE
	 22 0c 02 06 00 26 1c 03 03 3f 07 00 01 b5
	CISTPL_FUNCE
	 22 08 13 06 00 1f 00 ea 00 b5
	CISTPL_FUNCE
	 22 08 23 06 00 1f 00 ea 00 b5
	CISTPL_CONFIG
	 1a 05 01 03 f6 01 13
	CISTPL_CFTABLE_ENTRY
	 1b 12 c3 41 19 3f 55 c5 4b d5 19 36 36 56 a4 40
	 0f 30 ff ff
	unhandled CISTPL 14
	CISTPL_NO_LINK
	 14 00
	CISTPL_END
	 ff
	pccard0: check_cis_quirks
	pccard0: CIS version PC Card Standard 5.0
	pccard0: CIS info: Nokia Mobile Phones, Nokia Card Phone
	pccard0: Manufacturer code 0x124, product 0x900
	pccard0: function 0: serial port, ccr addr 1f6 mask 13
	pccard0: function 0, config table entry 3: I/O card; irq mask ffff;
	iomask 4, iospace 0-f; rdybsy_active io8 irqlevel
	pccard0: functions scanning
	pccard0: Card has 1 functions. pccard_mfc is 0
	pccard0: I/O rid 0 start 0 end ffffffff
	pcib4: pccard0 requested I/O range 0x9000-0xbfff: in range
	cbb_pcic_socket_enable:
	cbb0: b0: cbb_power: 5V
	pcib4: pccard0 requested memory range 0xcdd00000-0xcddfffff: good
	pccard0: ccr_res == cdd01000-cdd013ff, base=1f6
	pccard0: function 0 CCR at 0 offset 1f6: 43 20 1 1, 1 3 0 0, ff
	sio4: <Nokia Mobile Phones Nokia Card Phone> at port 0x9100-0x910f irq
	17 function 0 config 3 on pccard0
	sio4: type 16550A
	sio4: unable to activate interrupt in fast mode - using normal mode
	pccard0: function 0 CCR at 0 offset 1f6 mask 13: 43 20 1 1, 1 3 0 0, ff

Marian Cerny