/usr/ports/net/cvsup-without-gui make

minho at orangemail.sk minho at orangemail.sk
Sat Aug 23 02:42:55 CEST 2003


zdravim
zacal som sa ucit freebsd, je to system o ktorom som dost pocul a ktory s mi pozdava. momentalne sa ho ucim na starej masinke doska 5SVX, procak pentium 166MHz pretaktovany na 200MHz :), scsi disk segeate ST.... (8G), SCSI radic adaptec , sietovka 3Com 3C900B Combo, proste starucke komponenty ale malo by to fungovat (este nefunguje flopak tak tam mam redic ISA) ale
===> pri kompilacii "cvsup-without-gui" mi hlasi nasledovnu chybu

../../gcc/gcc/df.c: In function `df_lr_local_compute':
../../gcc/gcc/df.c:1821: internal error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://www.gnu.org/software/gcc/bugs.html> for instructions.
gmake[1]: *** [df.o] Error 1
gmake[1]: Leaving directory `/usr/ports/lang/ezm3/work/ezm3-1.1/language/modula3/m3compiler/m3cc/FreeBSD4/gcc'
mkdir FreeBSD4
--- building in FreeBSD4 ---

m3build: quake error: quake error: runtime error: Failed to build m3cc

--procedure--  -line-  -file---
error              --  <builtin>
                  112  /usr/ports/lang/ezm3/work/ezm3-1.1/language/modula3/m3compiler/m3cc/src/m3makefile


m3build: quake error: quake error: runtime error: m3build failed with error code: 1

--procedure--  -line-  -file---
error              --  <builtin>
BuildChunk        164  /usr/ports/lang/ezm3/work/ezm3-1.1/src/m3makefile
PkgInfo           240  /usr/ports/lang/ezm3/work/ezm3-1.1/src/m3makefile
                   31  /usr/ports/lang/ezm3/work/ezm3-1.1/src/PACKAGES

gmake: *** [packages] Error 1
*** Error code 2

Stop in /usr/ports/lang/ezm3.
*** Error code 1

Stop in /usr/ports/net/cvsup-without-gui.

takze xel by sm sa opytat ci mi s tym neviete poradit, v com je problem ci treba nieco nastavit ked ide o dost stary hardware, alebo je to chyba niekde v samotnom hardware (pamete, ....),  moj make.conf vyzera takto
######################################################
# $FreeBSD: src/share/examples/etc/make.conf,v 1.216 2003/05/21 21:47:20 ru Exp $
#
# NOTE:  Please would any committer updating this file also update the
# make.conf(5) manual page, if necessary, which is located in
# src/share/man/man5/make.conf.5.
#
# /etc/make.conf, if present, will be read by make (see
# /usr/share/mk/sys.mk).  It allows you to override macro definitions
# to make without changing your source tree, or anything the source
# tree installs.
#
# This file must be in valid Makefile syntax.
#
# There are additional things you can put into /etc/make.conf.
# You have to find those in the Makefiles and documentation of
# the source tree.
#
#
# The CPUTYPE variable controls which processor should be targeted for
# generated code.  This controls processor-specific optimizations in
# certain code (currently only OpenSSL) as well as modifying the value
# of CFLAGS to contain the appropriate optimization directive to gcc.
# The automatic setting of CFLAGS may be overridden using the
# NO_CPU_CFLAGS variable below.
# Currently the following CPU types are recognized:
#   Intel x86 architecture:
#       (AMD CPUs)      athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3
#                       k6-2 k6 k5
#       (Intel CPUs)    p4 p3 p2 i686 i586/mmx i586 i486 i386
#   Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4
#   Intel ia64 architecture: itanium
#
# (?= allows to buildworld for a different CPUTYPE.)
#
CPUTYPE?=i586
#NO_CPU_CFLAGS= true    # Don't add -march=<cpu> to CFLAGS automatically
#NO_CPU_COPTFLAGS=true  # Don't add -march=<cpu> to COPTFLAGS automatically
#
# CFLAGS controls the compiler settings used when compiling C code.
# Note that optimization settings above -O (-O2, ...) are not recommended
# or supported for compiling the world or the kernel - please revert any
# nonstandard optimization settings to "-O" before submitting bug reports
# to the developers.
# Note also that at this time the -O2 setting is known to produce BROKEN
# CODE on the Alpha platform.
#
CFLAGS= -O -pipe
#
# CXXFLAGS controls the compiler settings used when compiling C++ code.
# Note that CXXFLAGS is initially set to the value of CFLAGS.  If you wish
# to add to CXXFLAGS value, "+=" must be used rather than "=".  Using "="
# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
#
CXXFLAGS+= -fmemoize-lookups -fsave-memoized
#
# MAKE_SHELL controls the shell used internally by make(1) to process the
# command scripts in makefiles.  Three shells are supported, sh, ksh, and
# csh.  Using sh is most common, and advised.  Using ksh *may* work, but is
# not guaranteed to.  Using csh is absurd.  The default is to use sh.
#
#MAKE_SHELL?=sh
#
# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
# for use in developing FreeBSD and testing changes.  They can be used by
# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf.  -Wconversion is not
# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
#
BDECFLAGS=      -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align 
#               -Wcast-qual -Wchar-subscripts -Winline 
#               -Wmissing-prototypes -Wnested-externs -Wpointer-arith 
#               -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
#
# To compile just the kernel with special optimizations, you should use
# this instead of CFLAGS (which is not applicable to kernel builds anyway).
# There is very little to gain by using higher optimization levels, and doing
# so can cause problems.
#
#COPTFLAGS= -O -pipe
#
# To build the system compiler such that it forces high optimization levels to
# a lower one.  GCC -O2+ is known to trigger known optimizer bugs at various
# times -- this is worse on the Alpha platform.  The value assigned here will
# be the highest optimization value used.
#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1
#
# Compare before install
#INSTALL=install -C
#
# Mtree will follow symlinks
#MTREE_FOLLOWS_SYMLINKS= -L
#
# To build ppp with normal permissions
#PPP_NOSUID=    true
#
# To enable installing ssh(1) with the setuid bit turned on
#ENABLE_SUID_SSH=       true
#
# To enable installing newgrp(1) with the setuid bit turned on.
# Without the setuid bit, newgrp cannot change users' groups.
#ENABLE_SUID_NEWGRP=    true
#
# To avoid building various parts of the base system:
NO_CVS= true    # do not build CVS
#NO_CXX=        true    # do not build C++ and friends
NO_BIND=        true    # do not build BIND
NO_FORTRAN=     true    # do not build g77 and related libraries
NO_GDB= true    # do not build GDB
NO_I4B= true    # do not build isdn4bsd package
NO_IPFILTER=    true    # do not build IP Filter package
NO_KERBEROS=    true    # do not build and install Kerberos 5 (KTH Heimdal)
NO_LPR= true    # do not build lpr and related programs
#NO_MAILWRAPPER=true    # do not build the mailwrapper(8) MTA selector
#NO_MODULES=    true    # do not build modules with the kernel
#NO_OBJC=       true    # do not build Objective C support
NO_OPENSSH=     true    # do not build OpenSSH
NO_OPENSSL=     true    # do not build OpenSSL (implies NO_KERBEROS and
#                         NO_OPENSSH)
NO_SENDMAIL=    true    # do not build sendmail and related programs
NO_SHAREDOCS=   true    # do not build the 4.4BSD legacy docs
#NO_TCSH=       true    # do not build and install /bin/csh (which is tcsh)
NO_X=           true    # do not compile in XWindows support (e.g. doscmd)
#NOCRYPT=       true    # do not build any crypto code
NOGAMES=        true    # do not build games (games/ subdir)
NOINFO= true    # do not make or install info files
#NOLIBC_R=      true    # do not build libc_r (re-entrant version of libc)
#NOMAN=         true    # do not build manual pages
NOPROFILE=      true    # Avoid compiling profiled libraries
#NOSHARE=       true    # do not go into the share subdir
#
# To build sys/modules when building the world (our old way of doing things)
#MODULES_WITH_WORLD=true        # do not build modules when building kernel
#
# The list of modules to build instead of all of them.
#MODULES_OVERRIDE=      linux ipfw
#
# If you always want to build the Linux ext2fs kernel module.
#WANT_EXT2FS_MODULE=yes
#
# The following controls building optional IDEA code in libcrypto and
# certain ports.  Patents are involved - you must not use this unless
# you either have a license or fall within patent 'fair use'
# provisions.
#
# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
#
# IDEA is patented in the USA and many European countries - thought to
# be OK to use for any non-commercial use.  This is optional.
#MAKE_IDEA=     YES     # IDEA (128 bit symmetric encryption)
#
# If you do not want unformatted manual pages to be compressed
# when they are installed:
#
#NOMANCOMPRESS= true
#
#
# If you want the "compat" shared libraries installed as part of your normal
# builds, uncomment these:
#
#COMPAT1X=      yes
#COMPAT20=      yes
#COMPAT21=      yes
#COMPAT22=      yes
#COMPAT3X=      yes
#COMPAT4X=      yes
#
#
# Default format for system documentation, depends on your printer.
# Set this to "ascii" for simple printers or screen
#
#PRINTERDEVICE= ps
#
#
# How long to wait for a console keypress before booting the default kernel.
# This value is approximately in milliseconds. Keypresses are accepted by the
# BIOS before booting from disk, making it possible to give custom boot
# parameters even when this is set to 0.
#
#BOOTWAIT=0
#BOOTWAIT=30000
#
# By default, the system will always use the keyboard/video card as system
# console.  However, the boot blocks may be dynamically configured to use a
# serial port in addition to or instead of the keyboard/video console.
#
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all.  Alter as necessary.
#
#   COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
#
#BOOT_COMCONSOLE_PORT=  0x3F8
#
# The default serial console speed is 9600.  Set the speed to a larger value
# for better interactive response.
#
#BOOT_COMCONSOLE_SPEED= 115200
#
# By default the 'pxeboot' loader retrieves the kernel via NFS.  Defining
# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
# via TFTP.  This allows pxeboot to load a custom BOOTP diskless kernel yet
# still mount the server's '/' (i.e. rather than load the server's kernel).
#
#LOADER_TFTP_SUPPORT= YES
#
#
# Kerberos 5 su (k5su)
# If you want to use the k5su utility, define this to have it installed
# set-user-ID.
#ENABLE_SUID_K5SU=      yes
#
#
# Kerberos5
# If you want to install MIT Kerberos5 port somewhere other than /usr/local,
# define this (this is also used to tell ssh1 that kerberos is needed):
#
#KRB5_HOME=             /usr/local
#
#
# CVSup update flags.  Edit SUPFILE settings to reflect whichever distribution
# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
# information on CVSup and these files).  To use, do "make update" in /usr/src.
#
#SUP_UPDATE=     yes
#
#SUP=            /usr/local/bin/cvsup
#SUPFLAGS=       -g -L 2
#SUPHOST=        cvsup.uk.FreeBSD.org
#SUPFILE=        /usr/share/examples/cvsup/standard-supfile
#PORTSSUPFILE=   /usr/share/examples/cvsup/ports-supfile
#DOCSUPFILE=     /usr/share/examples/cvsup/doc-supfile
#
# top(1) uses a hash table for the user names.  The size of this hash
# can be tuned to match the number of local users.  The table size should
# be a prime number approximately twice as large as the number of lines in
# /etc/passwd.  The default number is 20011.
#
#TOP_TABLE_SIZE= 101
#
# Documentation
#
# The list of languages and encodings to build and install
#
#DOC_LANG=      en_US.ISO8859-1 ru_RU.KOI8-R
#
#
# sendmail
#
# The following sets the default m4 configuration file to use at
# install time.  Use with caution as a make install will overwrite
# any existing /etc/mail/sendmail.cf.  Note that SENDMAIL_CF is now
# deprecated.  The value should be a fully qualified path name.
# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
# create /etc/mail/sendmail.cf before installworld installs an
# updated sendmail binary.
#
#SENDMAIL_MC=/etc/mail/myconfig.mc
#
# The following sets the default m4 configuration file for mail
# submission to use at install time.  Use with caution as a make
# install will overwrite any existing /etc/mail/submit.cf.  The
# value should be a fully qualified path name.
# Avoid using a value of /etc/mail/submit.mc as a buildworld will
# create /etc/mail/submit.cf before installworld installs an
# updated sendmail binary.
#
#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
#
# If you need to build additional .cf files during a make buildworld,
# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
# create /etc/mail/sendmail.cf before installworld installs an
# updated sendmail binary.
#
#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
#
# Setting the following variable modifies the flags passed to m4 when
# building a .cf file from a .mc file.  It can be used to enable
# features disabled by default.
#
#SENDMAIL_M4_FLAGS=
#
# Setting the following variables modifies the build environment for
# sendmail and its related utilities. For example, SASL support can be
# added with settings such as:
#
#    with SASLv1:
#       SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
#       SENDMAIL_LDFLAGS=-L/usr/local/lib
#       SENDMAIL_LDADD=-lsasl
#
#    with SASLv2:
#       SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
#       SENDMAIL_LDFLAGS=-L/usr/local/lib
#       SENDMAIL_LDADD=-lsasl2
#
# Note: If you are using Cyrus SASL with other applications which require
#       access to the sasldb file, you should add the following to your

#       sendmail.mc file:
#
#       define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
#
#SENDMAIL_CFLAGS=
#SENDMAIL_LDFLAGS=
#SENDMAIL_LDADD=
#SENDMAIL_DPADD=
#
# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
# set-user-ID root binary instead of a set-group-ID smmsp binary and will
# prevent the installation of /etc/mail/submit.cf.
# This is a deprecated mode of operation.  See etc/mail/README for more
# information.
#
#SENDMAIL_SET_USER_ID=
#
# The permissions to use on alias and map databases generated using
# /etc/mail/Makefile.  Defaults to 0640.
#
#SENDMAIL_MAP_PERMS=
##################################################################
a xel by som sa este opytac ci by nebolo mozne napisat vyznam jednotlyvych casti make.conf a nasledne to niekde zavesit, alebo poslat mailom, myslim ze by to pomohlo nielen mne ale aj ostatnym.

dik poctivy zaciatocnik ktory sa snazi :) Milan



More information about the Users-l mailing list