AHA1535

[Zbyněk Burget]

pnpinfo mi vypsalo nasledujici:

Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID ADP1542 (0x42159004), Serial Number 0x113c2763
PnP Version 1.0, Vendor Version 16
Device Description: ˙daptec AHA-1542CP

Logical Device ID: ADP1542 0x42159004 #0
 Device supports I/O Range Check
 Vendor register funcs 00
Device Description: SCSI Host Adapter
Compatible Device ID: PNP00a0 (a000d041)
    IRQ: 9 10 11 12 14 15  - only one type (true/edge)
    DMA: channel(s) 0 5 6 7
 16-bit, bus master, count by byte, count by word, Type A
TAG Start DF
Good Configuration
    I/O Range 0x130 .. 0x130, alignment 0x4, len 0x4
 [16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x334 .. 0x334, alignment 0x4, len 0x4
 [16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x234 .. 0x234, alignment 0x4, len 0x4
 [16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x230 .. 0x230, alignment 0x4, len 0x4
 [16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x134 .. 0x134, alignment 0x4, len 0x4
 [16-bit addr]
TAG Start DF
Sub-optimal Configuration
    I/O Range 0x330 .. 0x330, alignment 0x4, len 0x4
 [16-bit addr]
TAG End DF
End Tag

Successfully got 20 resources, 1 logical fdevs
-- card select # 0x0001

CSN ADP1542 (0x42159004), Serial Number 0x113c2763

Logical device #0
IO:  0x0130 0x0130 0x0130 0x0130 0x0130 0x0130 0x0130 0x0130
IRQ 10 0
DMA 0 4
IO range check 0x00 activate 0x01





Nicmene nevim, jak to pouzit.

konfigurace kernelu vypada takhle:





machine  i386
cpu  I686_CPU
ident  Kernel-01
maxusers 0

options  FFS   #Berkeley Fast Filesystem
options  FFS_ROOT  #FFS usable as root device [keep this!]
options  SOFTUPDATES  #Enable FFS soft updates support
options  UFS_DIRHASH  #Improve performance on big directories
options  MFS   #Memory Filesystem
options  MSDOSFS   #MSDOS Filesystem
options  CD9660   #ISO 9660 Filesystem
options  PROCFS   #Process filesystem
options  COMPAT_43  #Compatible with BSD 4.3 [KEEP THIS!]
options  SCSI_DELAY=1500  #Delay (in ms) before probing SCSI
options  UCONSOLE  #Allow users to grab the console
options  SYSVSHM   #SYSV-style shared memory
options  SYSVMSG   #SYSV-style message queues
options  SYSVSEM   #SYSV-style semaphores
options  P1003_1B  #Posix P1003_1B real-time extensions
options  _KPOSIX_PRIORITY_SCHEDULING
options  ICMP_BANDLIM  #Rate limit bad replies
options  KBD_INSTALL_CDEV # install a CDEV entry in /dev

device  isa
device  pci
device  agp

# Floppy drives
device  fdc0 at isa? port IO_FD1 irq 6 drq 2
device  fd0 at fdc0 drive 0

# ATA and ATAPI devices
device  ata
device  atadisk   # ATA disk drives
device  atapicd   # ATAPI CDROM drives
device  atapifd   # ATAPI floppy drives
options  ATA_STATIC_ID  #Static device numbering

#SCSI Controller
device  aha0 at isa? port 0x130 irq 10 drq 5

#SCSI peripherals
device  scbus
device  da

# atkbdc0 controls both the keyboard and the PS/2 mouse
device  atkbdc0 at isa? port IO_KBD
device  atkbd0 at atkbdc? irq 1 flags 0x1
device  psm0 at atkbdc? irq 12

device  vga0 at isa?

# splash screen/screen saver
pseudo-device splash

# syscons is the default console driver, resembling an SCO console
device  sc0 at isa? flags 0x100

# Floating point support - do not disable.
device  npx0 at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device  apm0    at nexus? flags 0x20 # Advanced Power Management

# Serial (COM) ports
device  sio0 at isa? port IO_COM1 flags 0x10 irq 4
device  sio1 at isa? port IO_COM2 irq 3

# Parallel port
device  ppc0 at isa? irq 7
device  ppbus  # Parallel port bus (required)
device  lpt  # Printer
#device  plip  # TCP/IP over parallel
#device  ppi  # Parallel port interface device

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop  # Network loopback
pseudo-device md  # Memory "disks"
pseudo-device   pty             # Pseudo-ttys (telnet etc)

device  pcm
device  smb
device  smbus
device  intpm




Chybi mi tam jeste neco? ...nebo neco prebyva? V dmesg neni ani zminka o
aha.

Zbynek burget


----- Original Message -----
From: "Martin Salac" <xsalacm at certicon.cz>
To: <users-l at freebsd.cz>
Sent: Thursday, November 14, 2002 8:42 AM
Subject: Re: AHA1535



Co na to rika pnpinfo?
Stale se nemuzu zbavit dojmu, ze se nemuzete trefit do nastaveni karty.

Kazdopadne jeste muzu poradit "necekane":   www.google.com
search:   AHA 1535 FreeBSD

Vic me bohuzel nenapada.

> Zbynek Burget

Martin Salac